Dra. Camile Mendonça

Menu
Agendar

Item Tag: 2001

Dental SUPPRA Bond A Plus, Light-cured Dental Adhesive System 6ml

Dental SUPPRA Bond A Plus, Light-cured Dental Adhesive System. it is the most versatile Adhesive System for Bonding enamel and dentin in one Single Bottle. Indicated at Direct or indirect Esthetic Restauration and Cementation, also is ideal for applicatedin areas which are hard to reach, such as restorations in lower teeth or near the gums Features:Color less Adhesive Formula (does not interfere in Esthetics Restauration or Cementation Procedures)Excellent performance at any level of dentin;Proven clinical longevity: 94.2% after 18 months;High bond strength;Contains MDP;Low level Nano leakage;Adequate marginal sealing;Primer and bond in the same bottleBPA Free Formula. Contains Treated Silica Nanoparticles, Providing great stability and resistance to the Adhesive film. Adhesive Resistance to Dentin or Enamel; Up to 48Mpa adhesive remained high even with a more moist dentin or enamel, means High Tolerance to the Humidity, making the adhesive less sensitive of the technique. Conversion Degree(%) 60% Conversion degree, the better the quality of the structure of adhesive film, SUPPRA Bond A Plus Show a high conversion degree even on dentin with higher moist. Intra-Oral conversion Degree(%) Over 65% of Conversion degree apical third reversals the potential of our clear adhesive Formula at the polymerization of the adhesive. Adhesive to Intra-canal post (Mpa) Our Colorless or Clear Adhesive formula it was possible to achieve very high adhesive levels along the whole length of the canal, even in apical portion that represents the most difficult area for adhesive. Order info: 6ml Bottle Sup 2001

Pushglossy 2 Pcs M11 Door Gasket Kit Compatible with Midmark Ultraclave…

Pushglossy 2 Pcs M11 Door Gasket Kit Compatible with Midmark M11 Ultraclave & M11d Steam Sterilizers, Includes Door and Dam Gasket, Made from 100% High Quality Synthetic Silicone. Applicable Models: this Door Gasket Kit Compatible with Midmark M11 and M11d High-temperature Steam Sterilizers; Compatible with M11-2001 to 2019, compatible with M11-2020 to 2022, compatible with M11D-2001 to 2019, compatible with M11D-2020 to 2022; The OEM part number corresponding to the door washer is 053-0527-00, and the OEM part number corresponding to the baffle washer is 002-0504-00.

Vision Scientific VSP2001-3D, 12 Pre-cut Wounds 3D Silicon Suture Pad 8” X 8”

Free Shipping over $75 Customer Support Excellent Service 100% Satisfaction Satisfaction Guaranteed Vision Scientific VSP2001-3D Suture Pad 8” X 8” | 12 Pre-cut Wounds 3D Silicon Pad | Simulation of Human Tissue | Various Raised Laceration Types for Practice | W Manual (Educational and Demonstration Use Only) step1:change input-id.such as last one is image4, change it to image5 step2 change label-for.such as last one is image4, change it to image5 step3:change 2 src –> –> Product Description Product Features 8” x 8” silicon suturing pad, ideal to master suturing techniqueSimulate anatomical structure of human tissue, incisions and wounds raised laceration types for unique practice12 Pre-cut Wounds of various types of width, depth and lots of space to add additional cutsStrong vein forced to tolerate tension and pulling whole suturing are reusablePerfect for medical, nursing, and veterinary students Product Description This skin-like suture practicing pad is perfect for medical, nursing, and veterinary students. This tool is larger than traditional suture pads, giving you more space and options to practice on. This suture pad is durable and reusable so you can practice again and again. Raised Lacerations allow for ease of practice and multiple laceration types are imitated to ensure a unique practicing experience every time. Comes complete with an instruction sheet. Shipping Information 9” X 9” X 1”1 LB About Us About Us Vision Scientific is a leading supplier of scientific products throughout North America. Owned and operated by veterans in the scientific equipment industry who value quality, it has served the educational, medical and industrial sectors for over 30 years. Our technicians have years of first-hand experience and have extensive knowledge on the equipment we sell. We provide maintenance and repair parts from our stock on-hand. We truly believe here at Vision Scientific, that our company and our products are unique from any other merchandising providers. Contact Us Contact Us Phone: 1-855-737-9175 Email: sales@visionsci.com Value-Added Value-Added Open Box Policy Before we ship our microscopes to customers, our in-house technicians open each individual package and inspect every microscope. They ensure that the mechanical movement, electrical safety and optical alignment are in perfect order, with no dust in the optical system. Our superior quality is supported by their experience and our inventory of microscope parts on-hand. Warranty Policy Warranty Policy Vision Scientific warrants its microscopes to be free from defects in materials and workmanship under normal use and service for a period of five years starting from the date of purchase. A record of the original purchase order should be kept on file to verify the purchase and ensure warranty validation. This warranty is non-transferable and is only applicable to the original purchaser named on the original purchase order. Vision Scientific will, at its sole discretion, repair, replace, or adjust the defective instrument provided that an investigation and factory inspection disclose that such defect developed under normal and proper use and that the instrument is covered under this warranty. This warranty does not cover damage incurred in transit, or resulting from abuse, misuse, negligence or repairs and alterations performed by a non-authorized repair technician, and any other non-conformance to written maintenance instructions. This warranty excludes electrical problems that arise as a result of bulbs, batteries, or fuses and electrical components which are not determined to be from manufacturing defect. Electrical warranty is valid for 1 year, unless otherwise deemed as a manufacturing defect. After 1 year, authorization will be determined on an individual basis. Optics and lenses that become inoperable as a result of misuse or due to lack of normal maintenance are not covered under this warranty. This warranty does not cover repair or replacement where normal use has exhausted the life of the instrument or its parts. All instruments require periodic parts replacement and general service to perform optimally. Deficient instruments will be replaced or repaired at the discretion of Vision Scientific. Vision Scientific assumes no responsibility or liability of incidental or consequential damages as a result of using our instruments. Returning under Warranty In order to return any merchandise under a return authorization, all products must be packaged in their original packaging content, including Styrofoam boxes for both microscopes and balances. Vision Scientific Inc. exercises the right to refuse any return that is damaged due to insufficient packaging. The customer is responsible for all shipping costs and applicable fees and taxes. Other Warranties Beginner plastic microscope line: Not covered under warranty Digital Eyepiece Cameras: 1 Year Warranty Electrical Instruments: 1 Year Warranty Mechanical Balances: 5 Year Limited Warranty Clearance Items: Final sale Consumable Part & Accessories: Not covered under warranty Return Policy Return Policy If for any reason you are not fully satisfied with one of our products, Vision Scientific will gladly help you return the item either for refund or exchange within 14 days of the date you received your order. Our current return policy and practices are in place to make the process simple and to keep the best interests of our customers in mind. Requests for Returns must be made within 7 days after you have received your purchase. A Vision Scientific customer service representative will contact you within 2-4 business days to provide you with a Return Merchandise Authorization Number (RMA#) and additional shipping instructions. This RMA# will only be valid for a period of 7 days after the date it was issued. Print the return label and RMA# and mark it on the packaging prior to shipping. You MUST have a Return Authorization Number in order to return any item. Please keep your original purchase order number nearby ? you will need this for your Return Authorization to be processed. Your return item must be mailed out within 14 days after you have received your purchase. Your item must be in NEW and RE-SALEABLE condition in order to be accepted for return. Return items must be shipped in the original packaging in order to receive a full refund less the original shipping and handling cost. The use of other packaging materials may result in a deduction of up to 20% from the refund amount. Missing items or accessories from the return will result in a deduction of 25% or more from the refunded amount. All returned goods will be subject to a 4.8% handling fee which will automatically be deducted from the refund amount. Items that were initially shipped free of charge will have the original shipping amount deducted from the refund if returned. Customs duty, taxes, and applicable handling fees are non-refundable. Returns received without an RMA Number will be returned to sender COD. Damaged Items If your item arrives damaged, document any and all evidence with photos, and note it on the carrier?s delivery documents. Contact the shipping carrier to file a damage claim and request a Damage Claim Number as soon as possible. Have the shipping carrier pick up the item for return to Vision Scientific. Inform the Vision Scientific customer service department as soon as you receive a file a claim with the carrier and provide us with all information and evidence of damages or defects (photos, delivery documents, damage claim number etc.).Please do not discard packaging or contents, as couriers often want to inspect the damaged merchandise and packaging to assist in the claims process. Notifications of damaged goods after 14 days of receipt will be considered warranty issues and will be subject to the terms supplied in the individual items warranty information. Wrong Items If you have received an item in error that was not part of your original purchase, please contact our Customer Service Department within 14 days of receipt. You may be asked to complete our Return Authorization form and to provide photographic evidence prior to receiving a Return Authorization Number. After confirmation, you will receive a prepaid shipping label to be used for the return. Once we have received the item, the correct item will be immediately shipped to you. In the event you request a refund rather than an item exchange, the original shipping cost will be deducted from the refund amount. Free Shipping Over $75 Best Quality Customer Satisfaction CUSTOMER SUPPORT Excellent Service

Temporal Bone Holder – Stainless Steel, Black Color

The Temporal Bone Holder is a specialized tool used in various healthcare and dental settings for securely holding and positioning the temporal bone during surgical procedures. This holder helps ensure precise and controlled movements of the bone, allowing for easier access and visibility of the patient’s ear canal. Designed for ergonomic use and stability, this tool is an essential component for successful and efficient medical and dental interventions.